14 Essential Electrician Tools for Service Technicians

Electricians rely on their tools for areas like safety, accuracy, craftsmanship, and comfort. Generally, you will see your electrician with an electrical tool kit. Assembling and maintaining this tool kit with the proper tools and gear is a key responsibility for an electrician. Every job you go to can require different electrical components and making sure you have the right tools in your kit is essential.

Here are 14 common tools you will find in an electrician’s belt:

 

1. Pliers

Pliers are important for electricians who regularly work with and cut wire. The most commonly used pliers used by an electrician can include needle-nose pliers, side-cutting pliers, and reaming pliers.

 

 

2. Screwdrivers

Electricians will always have a variety of screwdrivers for loosening and fastening various pieces of hardware. Many professionals will carry adaptable screwdrivers with interchangeable bits so they’re never stuck without the electrical hand tools they need.

 

3. Tape Measure

When electricians work with wiring, it’s important to know the lengths of pieces you are cutting and stripping. A simple retractable tape measure will get most jobs in the field done, but there are advanced tape measures on the market that will make the process easier.

 

4. Electric Drill

Electricians will use an electric drill to help them install new lighting fixtures or disassemble installed hardware to access wiring and other electrical components. This tool is used often since installing lighting fixtures or accessing electrical wiring is a common task asked of an electrician.

 

5. Level

When installing light fixtures, finding precise points for placement is key. A standard level helps electricians make sure that fixtures, screws, and other installations are where they need to be. Some levels are magnetized for convenience and more accurate readings.

 

6. Wire Strippers

Wire strippers are essential for professional electricians who frequently have to strip the plastic coating on wires to expose the copper and make customized connections with other wiring or components. There are many wire stripper types and most electricians have various versions ready to use at their next job.

 

7. Fish Tape

Fish tape is used to run wiring between different electrical components through conduit piping. Fish tape is kept in a retractable coil and can be fed through installed conduit piping. Once the end of the fish tape appears on the opposite side, wiring can be hooked to the tape and the tape can be retracted.

 

8. Voltage Tester

Electrical work cannot safely begin until power has been cut off in certain parts of the property. A handheld voltage tester allows electricians to test to see if outlets are active and when power has been properly restored for the homeowner.

 

9. Reaming Bit

To install new or replace old conduits, you connect different segments of piping together to create a wiring route between electrical components. A reaming bit attaches to an electric drill, which widens the opening on one end of the piping and allows it to connect to another segment of piping and complete a secure conduit.

 

10. Conduit Bender

When determining a wiring route, most electricians plan to run wiring along the corner of the wall in the area they are working. Conduit benders allow electricians to curve conduit piping so electricians can use these routes and make sure that the conduits remain out of the way.

 

11. Flashlights

As an electrician, sooner or later you’ll have no other option than to work in the dark. Many electricians will be prepared for such a circumstance by carrying flashlights or other work lights in their truck.

 

12. Insulated Gloves

Electrocution is death or severe injury by electrical shock. Due to this possibility on any given job site, electricians need to take precautions. Electricians should have insulated gloves on them for every job.

 

 

13. Safety Glasses

Electricians on their first job or ones that have been working their entire lives should have a pair of safety glasses on hand at every job site. Whether they are inspecting wiring or using power tools, protecting your eyes should be a priority.

 

14. Circuit Finders

It can be sometimes difficult to know which outlets are connected to which circuit in a house. Electricians now use circuit finders that incorporate two main components: a handheld digital transmitter and small receivers that plug into outlets around the home. It will indicate which circuit which outlet belongs to.

 

Learn more about our Electrical program.

 

References/Sources:

18 Essential Electrician Tools for Service Techs in 2020. (n.d.). Retrieved from https://www.servicetitan.com/blog/best-electrician-tools

Electrical Tool Kit List: What You’ll Need. (n.d.). Retrieved from https://www.electricianinformationresource.com/electrical-tool-kit.html

 

About FTC: Founded in 1982 to provide private, post-secondary education in specialized fields, Florida Technical College is an academic unit of National University College (NUC), which is accredited by the Middle States Commission on Higher Education (MSCHE), 3624 Market Street, Philadelphia, PA 19104 (267) 284-5000. The MSCHE is a regional accrediting agency recognized by the U.S. Secretary of Education and the Council for Higher Education Accreditation. FTC offers associate and bachelor’s degrees as well as diploma programs in a range of industries, including healthcare, construction trades, hospitality, cosmetology, business, and information technology. FTC campuses are located in Orlando, Kissimmee, Lakeland, DeLand, Pembroke Pines, Cutler Bay, and Tampa. Program availability varies by campus.

Leave a Reply

Your email address will not be published. Required fields are marked *

*